Finally Hair building fibers are designed to de-clump when you shake them. If you find your hair fibers are clumping the first thing to do is to put them in the container, remove the sifter, attach the lid and shake them vigorously. You should see the fibers disperse. Then open the bottle and replace the sifter.
If the hair fibers don’t disperse, try stirring them with a toothpick. Then replace the sifter. If the fibers don’t stir the odds are they have gotten wet. In this case you can return them to Finally Hair for free exchange. Please send them to: Finally Hair Corporation, 4851 West Hillsboro Blvd. Ste. A12, Coconut Creek, FL 33073. Be sure to include your original packing list. If you don’t have your packing list, please include your full name, shipping address, email address, phone number and if you have an order number that is very helpful. We will exchange them right away.
If the fibers move freely but don’t dispense from the bottle, please remove the sifter and clean it with water. Be sure the sifter is totally dry before putting it back on the bottle. Here is a picture of the bottle parts:
Here are some valuable tips that will help you to avoid clumping while styling your hair:
Your hair should be totally dry. If you use gel or a product that leaves your hair wet prior to applying the fibers, they may clump. If your hair is excessively oily it could cause the same effect.
The bathroom is overly humid. Sometimes if the fibers are applied right after a shower, the room can have 100% humidity causing the hair fibers to become damp. This can cause hair fibers to clump.
Too much hair spray or the hair spray is wet. Try Finally Hair Fiber Lock Spray or a different spray. Finally Hair Fiber Lock Hair Spray is available in a styling spray (medium) or a strong fixative that holds the fibers in place (strong). With the strong fixative you can lay on your pillow and hardly any will come off.
Applying too much hair fiber. Less is more. It is best to use small amounts of hair fibers so they don’t lay on heavy and cause a carpet effect. Try using less.
We highly suggest using the Finally Hair refillable applicator bottle. The hole size varies for different brands. Using a bottle that has holes that are too big in the sifter can cause too many fibers to come out at one time and make them clump. We advise against using an applicator with a brush (like a mascara brush) attached. Some sprayers spray too many fibers at one time.
Do not comb or brush your hair. Hair fibers are temporary and they come off. If you comb or brush your hair then they will move or come off leaving a less than desirable styling effect.
Again, shake the fibers. Finally Hair fibers are designed to disperse when shaken. Sometimes fibers can compress during shipment. If you shake the fibers they will disperse.Please try these ideas before returning your hair fibers.
Please keep in mind that the nature of hair fibers is they are temporary makeup which are held on by hair spray. If you wear the fibers for multiple days, several things can happen:
The hair spray can break down and stop working so the fibers are not held in place.
The hair spray can gunk up and create clumps.
Most hair fiber companies warn against brushing or combing your hair fibers. When you brush or comb it disengages the fibers.
The longer you go without shampooing the more of a chance that your hair will get naturally oily. This in combination with combing or brushing will loosen the fibers from your natural hair. Once loose the fibers will tend to cling more to themselves (since your hair has become oily) or fall out.
Also, it could be that the container you are using is applying too many fibers to begin with. Excessive fibers create more of a carpet look which is undesirable. Finally Hair containers have the ideal hole size in the sifter and this helps to apply the proper amount of fibers.
Much like facial makeup, we highly suggest to our users that they apply it every day or every other day after shampooing for the optimum look.
Super Valuable Hair Fibers Tip:
Finally Hair introduced fhPrep, a patent pending all natural prep solution that helps the fibers stand up. Try spraying a light mist of fhPrep onto your hair and scalp. It helps the fibers to stand upright and gives a great effect.
Hair Fiber Directions: Finally Hair building fiber is an instant solution to conceal hair loss. The hair fiber is easy to apply. It comes in a refillable applicator bottle or in refill bags. Simply shake the bottle to apply the fibers over your thin areas and watch them disappear. Use our Finally Hair Fiber Lock Spray to lock the fibers in. And you Finally have hair! Now you look better, feel younger and have regained confidence. The fiber is virtually undetectable. They are made of natural ingredients that is statically charged. Finally Hair Fibers intertwine with your existing hair for a completely natural look. Finally Hair resists wind, rain and perspiration but removes easily with shampoo.
Finally Hair Directions:
The optimum hair building fibers application method is as follows:
1) style your hair for maximum coverage using the medium spray. Do not use the medium spray to lock the fibers – it won’t.
2) use fhPrep… a light mist and let it dry for a minute or two – it helps the fibers to stand up and look more natural.
3) Apply the fibers.
4) Use the strong spray to lock the fibers to your hair.
The Finally Hair applicator bottle contains these abbreviated directions (due to space constraints) or some variation:
Apply hair fibers to dry hair. Hold the container like a salt shaker above your head and start sprinkling the fibers evenly over the area needed coverage. Shake and sprinkle gently until you have achieved the desired coverage. Do not over spill – in most cases less is more. Lightly pat the hair fibers down after applying to the hair.
Finally Hair will work best on hair at least an inch and a half long.
Finally Hair Fibers hold longer when a hair spray is used on hair after fibers are applied. We highly recommend Finally Hair Fiber Lock Spray.
To remove the fiber wash your hair with shampoo. Dry it gently.
Here are some tips on how to apply the fiber so they look their best:
First shampoo your hair or wet it.
Dry your hair completely. The fibers cling best on totally dry hair. The fibers are magnetized to grab on to your existing hair and scalp so use them sparingly. When it comes to fibers, less is more. Don’t over apply the fibers. Once the thin area looks dark, the odds are you have applied enough.
Style your hair for maximum coverage. You may want to grow some parts of your hair a little longer so when you comb it, the hair covers very thin areas. Some people call this a comb over however in the world of Finally Hair we call this a great foundation for the hair fibers to cling to. Remember, they are called “hair building fibers” because the fiber particles form little branches on an existing strand of hair which gives the appearance that it is not a single hair. A single strand of hair can simulate the trunk of a tree where there are suddenly so many branches that add fullness, body, and fill in the missing regions of the scalp creating the effect of a full head of hair.
Do not use gel or any products that will leave your hair wet. When the hair is wet, the fibers become wet. This causes a clumping effect. The goal is to not clump up the fibers.
Make sure the room you apply the fibers in is not overly humid. If you just took a shower in a small bathroom, the humidity can be as much as 100%. This will make anything in the room wet, including the fibers. Again, we don’t want to wet the fibers. They should be applied in a dry room on dry hair.
You can mix the fibers to get the exact color you desire. If you mix the fibers, you may want to remove the sifter from the bottle and shake them. Then reapply the sifter.
Hair fibers can be a little messy. We suggest hanging a mirror in your shower or in a confined area which is easy to rinse or clean. Of course if you apply the fibers in the shower, make sure it is dry and please be careful not to slip or fall.
You can use a second hand mirror to apply the fibers to the back or your hair. The use of the hand mirror and the wall mirror should give you a perfect view of all sides of your head.
It is often better to tap the side of the applicator bottle rather than shake it. Tapping the bottle will release a precise flow of fibers. Shaking it can sometimes disperse a wider flow which is not quite as easy to control.
Tap the bottle gently to cover thin areas. Again don’t over apply the fibers. Just tap until the area is the color of the fibers you use.
Pat your head gently with your hand to distribute the fibers a bit more.
Spray your hair with Finally Hair Fiber Lock spray to lock the fibers in.
We do not recommend brushing your hair once the fibers are in place. Brushing your hair can remove the fiber.
Here is a video that shows how the fibers are applied:
How do you refill your bottle?All Finally Hair bottles are refillable so you can save money by using refill bags after the initial bottle purchase. Watch this quick video to learn how to open the bottle. It is easy as 1-2-3!
Should you have any additional questions please don’t hesitate to contact us. We also welcome suggestions. Our goal is to make the best product and to have the happiest customers. Thank you for your business!